Clofazimine pKa Determination by Potentiometry and Spectrophotometry: Reverse Cosolvent Dependence as an Indicator of the Presence of Dimers in Aqueous Solutions.

The weakly basic antibiotic and anti-inflammatory drug, clofazimine (CFZ), was first described in 1957. It has been used therapeutically, most notably in the treatment of leprosy. However, the compound is extremely insoluble in aqueous media, and, indeed, there is poor consensus about what its intrinsic solubility is since the reported values range from 0.04 to 11 ng/mL. To understand the speciation and solubilization of CFZ as a function of pH, it is of paramount importance to know the true aqueous pKa. However, there is also poor consensus about the value of the pKa (reported measured values range from 6.08 to 9.11). In the present study, we report the determination of the CFZ ionization constant using two independent techniques. A state-of-the-art potentiometric analysis was performed, drawing on titration data in methanol-water solutions (46-75 wt % MeOH) of CFZ, using the bias-reducing consensus of two different procedures of extrapolating the apparent psKa values to zero cosolvent to approximate the true aqueous pKa as 9.43 ± 0.12 (25 °C, I = 0.15 M reference ionic strength). In parallel, spectrophotometric UV/vis titration data were acquired (250-600 nm at different pH) in 10 mM HEPES buffer solutions containing up to 54 wt % MeOH. The alternating least squares (ALS) method was used in the analysis of the absorbance-pH spectra. Uncharacteristically, the cosolvent UV/vis data in our study showed reverse cosolvent dependence (apparent pKa values increased with increasing cosolvent) which could be explained by a dimerization of the free base. The analysis of UV/vis data obtained from 54 wt % MeOH-water solution containing 20 µM CFZ yielded the apparent pKa 9.51 ± 0.17 (I ≈ 0.005 M). To assess whether self-assembly of CFZ was energetically feasible, density functional theory (DFT) calculations were used to study the putative CFZ dimers in aqueous and methanol media. The DFT-optimized geometries and infrared spectra of CFZ dimers using water and methanol as solvents were calculated and analyzed. Based on the lack of negative frequencies in calculated infrared spectra, it was confirmed that optimized geometries correspond to the true energetic minima. Visual analysis of optimized structures indicates the presence of stacking interactions between two CFZ molecules. The protonation site (the imine nitrogen atom) was determined by 1H NMR spectroscopy.

Experimental Examination of Solubility and Lipophilicity as Pharmaceutically Relevant Points of Novel Bioactive Hybrid Compounds.

The important physicochemical properties of three novel bioactive hybrid compounds with different groups (-CH3, -F and -Cl) were studied, including kinetic and thermodynamic solubility in pharmaceutically relevant solvents (buffer solutions and 1-octanol) as well as partition coefficient in system 1-octanol/buffer pH 7.4. The aqueous solubility of these chemicals is poor and ranged from 0.67 × 10-4 to 1.98 × 10-3 mol·L-1. The compounds studied are more soluble in the buffer pH 2.0, simulating the gastrointestinal tract environment (by an order of magnitude) than in the buffer pH 7.4 modelling plasma of blood. The solubility in 1-octanol is significantly higher; that is because of the specific interactions of the compounds with the solvent. The prediction solubility behaviour of the hybrid compounds using Hansen's three-parameter approach showed acceptable results. The experimental solubility of potential drugs was successfully correlated by means of two commonly known equations: modified Apelblat and van't Hoff. The temperature dependencies of partition coefficients of new hybrids in the model system 1-octanol/buffer pH 7.4 as a surrogate lipophilicity were measured by the shake flask method. It was found that compounds demonstrated a lipophilic nature and have optimal values of partition coefficients for oral absorption. Bioactive assay manifested that prepared compounds showed antifungal activities equal to or greater than fluconazole. In addition, the thermodynamic aspects of dissolution and partition processes have been examined. Bioactive assay manifested that prepared compounds showed antifungal activities equal to or greater than the reference drug.

Identification and Quantitation of Aqueous Single- and Multianalyte Solutions of the Isomers Ethylbenzene, m-, p-, and o-Xylene Using a Single Specifically Tailored Sensor Coating and Estimation Theory-Based Signal Processing.

The isomer-specific detection and quantitation of m-, p-, and o-xylene and ethylbenzene, dissolved singly and as mixtures in aqueous solutions at concentrations from 100 to 1200 ppb by volume, is reported for a specifically designed polymer-plasticizer coating on a shear-horizontal surface acoustic wave (SH-SAW) device. The polystyrene-ditridecyl phthalate-blend coating was designed utilizing Hansen solubility parameters and considering the dipole moment and polarizability of the analytical targets and coating components to optimize the affinity of the sensor coating for the four chemical isomers. The two key coating sorption properties, sensitivity and response time constant, are determined by the (slightly different) dipole moments and polarizabilities of the four target analytes: as analyte dipole moment decreases, coating sensitivity increases; as analyte polarizability decreases, coating response time lengthens. Using the measured sensitivities and time constants for the targets, sensor signals were processed with exponentially weighted recursive-least-squares estimation (EW-RLSE) to identify (with near 100% accuracy) and quantify (with ± 5-7% accuracy) the isomers. This impressive performance was achieved by combining the specifically tailored, high-sensitivity coating and an SH-SAW platform (yielding a detection limit of 5 ppb for the analytes) and using the EW-RLS estimator, which estimates unknown parameters accurately even in the presence of measurement noise and for analytes with only minor differences in response. Identification of the xylene isomers is important for applications including environmental monitoring and chemical manufacturing.

Application-Specific Adaptable Coatings for Sensors: Using a Single Polymer-Plasticizer Pair to Detect Aromatic Hydrocarbons, Mixtures, and Interferents in Water with Single Sensors and Arrays.

A relatively simple design procedure is presented for new, adaptable chemical sensor coatings made from a single polymer-plasticizer pair to detect single or a mixture of chemical compounds (e.g., BTEX, the small aromatic hydrocarbon family). Affinity between coating components and target analytes, expressed through Hansen solubility parameters and relative energy difference values, describes the sensitivity of the resultant coatings to each analyte. While analyte affinity is paramount for plasticizer selection, for the aqueous-phase sensing application described here, it must be traded off with the permanence in the host polymer, i.e., resistance to leaching into the ambient aqueous phase; deleterious effects including coating creep must also be minimized. By varying the polymer:plasticizer mixing ratio, the physical and chemical properties of the resultant coatings can be tuned across a range of sensing properties, in particular the differential response magnitude and rate, for multiple analytes. Together with the measurement of multiple sensor response parameters (relative sensitivity and response time constant) for each coating, this approach allows for identification and quantification of target analytes not previously separable using commercial off-the-shelf (COTS) polymer sensor coatings. Sensing results using a five-sensor array based on five different mixing ratios of a single plasticizer polymer pair (plasticizer: ditridecyl phthalate; polymer: polystyrene) demonstrate unique identification of mixtures of BTEX analytes, including differentiation of the chemical isomers ethylbenzene and total xylene (or "xylenes"), something not previously feasible for separation-free liquid-phase sensing with commercially available polymer coatings. Ultimately, the response of a single optimized sensor coating identified and quantified the components of various mixtures, including identification of likely interferents, using a customized estimation-theory-based multivariate signal-processing technique.

Solubility of Cinnarizine in (Transcutol + Water) Mixtures: Determination, Hansen Solubility Parameters, Correlation, and Thermodynamics.

Between 293.2 and 313.2 K and at 0.1 MPa, the solubility of the weak base, cinnarizine (CNZ) (3), in various {Transcutol-P (TP) (1) + water (2)} combinations is reported. The Hansen solubility parameters (HSP) of CNZ and various {(TP) (1) + water (2)} mixtures free of CNZ were also predicted using HSPiP software. Five distinct cosolvency-based mathematical models were used to link the experimentally determined solubility data of CNZ. The solubility of CNZ in mole fraction was increased with elevated temperature and TP mass fraction in {(TP) (1) + water (2)} combinations. The maximum solubility of CNZ in mole fraction was achieved in neat TP (5.83 × 10-2 at 313.2 K) followed by the minimum in neat water (3.91 × 10-8 at 293.2 K). The values of mean percent deviation (MPD) were estimated as 2.27%, 5.15%, 27.76%, 1.24% and 1.52% for the "Apelblat, van't Hoff, Yalkowsky-Roseman, Jouyban-Acree, and Jouyban-Acree-van't Hoff models", respectively, indicating good correlations. The HSP value of CNZ was closed with that of neat TP, suggesting the maximum solubilization of CNZ in TP compared with neat water and other aqueous mixtures of TP and water. The outcomes of the apparent thermodynamic analysis revealed that CNZ dissolution was endothermic and entropy-driven in all of the {(TP) (1) + water (2)} systems investigated. For {(TP) (1) + water (2)} mixtures, the enthalpy-driven mechanism was determined to be the driven mechanism for CNZ solvation. TP has great potential for solubilizing the weak base, CNZ, in water, as demonstrated by these results.

Isavuconazole: Thermodynamic Evaluation of Processes Sublimation, Dissolution and Partition in Pharmaceutically Relevant Media.

A temperature dependence of saturated vapor pressure of isavuconazole (IVZ), an antimycotic drug, was found by using the method of inert gas-carrier transfer and the thermodynamic functions of sublimation were calculated at a temperature of 298.15 K. The value of the compound standard molar enthalpy of sublimation was found to be 138.1 ± 0.5 kJ·mol-1. The IVZ thermophysical properties-melting point and enthalpy-equaled 302.7 K and 29.9 kJ mol-1, respectively. The isothermal saturation method was used to determine the drug solubility in seven pharmaceutically relevant solvents within the temperature range from 293.15 to 313.15 K. The IVZ solubility in the studied solvents increased in the following order: buffer pH 7.4, buffer pH 2.0, buffer pH 1.2, hexane, 1-octanol, 1-propanol, ethanol. Depending on the solvent chemical nature, the compound solubility varied from 6.7 × 10-6 to 0.3 mol·L-1. The Hansen s approach was used for evaluating and analyzing the solubility data of drug. The results show that this model well-described intermolecular interactions in the solutions studied. It was established that in comparison with the van't Hoff model, the modified Apelblat one ensured the best correlation with the experimental solubility data of the studied drug. The activity coefficients at infinite dilution and dissolution excess thermodynamic functions of IVZ were calculated in each of the solvents. Temperature dependences of the compound partition coefficients were obtained in a binary 1-octanol/buffer pH 7.4 system and the transfer thermodynamic functions were calculated. The drug distribution from the aqueous solution to the organic medium was found to be spontaneous and entropy-driven.

Solubilization of Trans-Resveratrol in Some Mono-Solvents and Various Propylene Glycol + Water Mixtures.

This research deals with the determination of solubility, Hansen solubility parameters, dissolution properties, enthalpy-entropy compensation, and computational modeling of a naturally-derived bioactive compound trans-resveratrol (TRV) in water, methanol, ethanol, n-propanol, n-butanol, propylene glycol (PG), and various PG + water mixtures. The solubility of TRV in six different mono-solvents and various PG + water mixtures was determined at 298.2-318.2 K and 0.1 MPa. The measured experimental solubility values of TRV were regressed using six different computational/theoretical models, including van't Hoff, Apelblat, Buchowski-Ksiazczak λh, Yalkowsly-Roseman, Jouyban-Acree, and van't Hoff-Jouyban-Acree models, with average uncertainties of less than 3.0%. The maxima of TRV solubility in mole fraction was obtained in neat PG (2.62 × 10-2) at 318.2 K. However, the minima of TRV solubility in the mole fraction was recorded in neat water (3.12 × 10-6) at 298.2 K. Thermodynamic calculation of TRV dissolution properties suggested an endothermic and entropy-driven dissolution of TRV in all studied mono-solvents and various PG + water mixtures. Solvation behavior evaluation indicated an enthalpy-driven mechanism as the main mechanism for TRV solvation. Based on these data and observations, PG has been chosen as the best mono-solvent for TRV solubilization.

Solubility Determination, Hansen Solubility Parameters and Thermodynamic Evaluation of Thymoquinone in (Isopropanol + Water) Compositions.

This article studies the solubility, Hansen solubility parameters (HSPs), and thermodynamic behavior of a naturally-derived bioactive thymoquinone (TQ) in different binary combinations of isopropanol (IPA) and water (H2O). The mole fraction solubilities (x3) of TQ in various (IPA + H2O) compositions are measured at 298.2-318.2 K and 0.1 MPa. The HSPs of TQ, neat IPA, neat H2O, and binary (IPA + H2O) compositions free of TQ are also determined. The x3 data of TQ are regressed by van't Hoff, Apelblat, Yalkowsky-Roseman, Buchowski-Ksiazczak λh, Jouyban-Acree, and Jouyban-Acree-van't Hoff models. The maximum and minimum x3 values of TQ are recorded in neat IPA (7.63 × 10-2 at 318.2 K) and neat H2O (8.25 × 10-5 at 298.2 K), respectively. The solubility of TQ is recorded as increasing with the rise in temperature and IPA mass fraction in all (IPA + H2O) mixtures, including pure IPA and pure H2O. The HSP of TQ is similar to that of pure IPA, suggesting the great potential of IPA in TQ solubilization. The maximum molecular solute-solvent interactions are found in TQ-IPA compared to TQ-H2O. A thermodynamic study indicates an endothermic and entropy-driven dissolution of TQ in all (IPA + H2O) mixtures, including pure IPA and pure H2O.

Effect of lyophilization on the bacterial cellulose produced by different Komagataeibacter strains to adsorb epicatechin.

Bacterial cellulose (BC) has been widely used as a model system to investigate the interaction of polyphenols with the polysaccharides of cell walls. In this study, the water absorption ability and the adsorption ability of epicatechin of the never-dried and freeze-dried BC produced by a high-yield Komagataeibacter hansenii strain ATCC 53582 was compared with two normal-yield strains. The structural characteristics of BC were investigated via microscopy observation and mechanical/rheological tests. The 1-butyl-3-methylimidazolium acetate/dimethyl sulfoxide ([BMIM]Ac/DMSO) co-solvent was used to dissolve BC to calculate the degree of polymerization (DP). Results showed that compared with the other two strain, the BC synthesised by ATCC 53582 had a higher cellulose concentration (1.2 wt%) but lower epicatechin adsorption (29 µg/mg under 4 mM, pH 7). Its fibril network collapsed and led to a reduced recovery ratio (86 %) in the compression-relaxation test, which may be due to large DP (2856).

Solubility Data of the Bioactive Compound Piperine in (Transcutol + Water) Mixtures: Computational Modeling, Hansen Solubility Parameters and Mixing Thermodynamic Parameters.

The solubility values and thermodynamic parameters of a natural phytomedicine/nutrient piperine (PPN) in Transcutol-HP (THP) + water combinations were determined. The mole fraction solubilities (xe) of PPN in THP + water combinations were recorded at T = 298.2-318.2 K and p = 0.1 MPa by the shake flask method. Hansen solubility parameters (HSPs) of PPN, pure THP, pure water and THP + water mixtures free of PPN were also computed. The xe values of PPN were correlated well with "Apelblat, Van't Hoff, Yalkowsky-Roseman, Jouyban-Acree and Jouyban-Acree-Van't Hoff" models with root mean square deviations of < 2.0%. The maximum and minimum xe value of PPN was found in pure THP (9.10 × 10-2 at T = 318.2 K) and pure water (1.03 × 10-5 at T = 298.2 K), respectively. In addition, HSP of PPN was observed more closed with that of pure THP. The thermodynamic parameters of PPN were obtained using the activity coefficient model. The results showed an endothermic dissolution of PPN at m = 0.6-1.0 in comparison to other THP + water combinations studied. In addition, PPN dissolution was recorded as entropy-driven at m = 0.8-1.0 compared with other THP + water mixtures evaluated.

Solubility Data and Computational Modeling of Baricitinib in Various (DMSO + Water) Mixtures.

The solubility and thermodynamic analysis of baricitinib (BNB) in various dimethyl sulfoxide (DMSO) + water mixtures were performed. The "mole fraction solubilities (xe)" of BNB in DMSO and water mixtures were determined at "T = 298.2-323.2 K" and "p = 0.1 MPa" using an isothermal saturation technique. "Hansen solubility parameters (HSPs)" of BNB, pure DMSO, pure water and "DMSO + water" mixtures free of BNB were also estimated. The xe data of BNB was regressed well by five different thermodynamics-based co-solvency models, which included "Apelblat, Van't Hoff, Yalkowsky-Roseman, Jouyban-Acree and Jouyban-Acree-Van't Hoff models" with overall deviations of <5.0%. The highest and lowest xe value of BNB was computed in pure DMSO (1.69 × 10-1 at T = 323.2 K) and pure water (2.23 × 10-5 at T = 298.2 K), respectively. The HSP of BNB was found to be closer to that of pure DMSO. Based on activity coefficient data, maximum solute-solvent molecular interactions were observed in BNB-DMSO compared to BNB-water. The results of "apparent thermodynamic analysis" indicated endothermic and entropy-drive dissolution of BNB in all "DMSO + water" combinations including mono-solvents (water and DMSO). "Enthalpy-entropy compensation analysis" showed enthalpy-driven to be the main mechanism of solvation of BNB.

Solubility, Hansen Solubility Parameters and Thermodynamic Behavior of Emtricitabine in Various (Polyethylene Glycol-400 + Water) Mixtures: Computational Modeling and Thermodynamics.

This study was aimed to find out the solubility, thermodynamic behavior, Hansen solubility parameters and molecular interactions of an antiviral drug emtricitabine (ECT) in various "[polyethylene glycol-400 (PEG-400) + water]" mixtures. The solubility of ECT in mole fraction was determined at "T = 298.2 to 318.2 K" and "p = 0.1 MPa" using an isothermal method. The experimental solubilities of ECT in mole fraction were validated and correlated using various computational models which includes "Van't Hoff, Apelblat, Yalkowsky-Roseman, Jouyban-Acree and Jouyban-Acree-Van't Hoff models". All the models performed well in terms of model correlation. The solubility of ECT was increased with the raise in temperature in all "PEG-400 + water" mixtures studied. The highest and lowest solubility values of ECT were found in pure PEG-400 (1.45 × 10-1) at "T = 318.2 K" and pure water (7.95 × 10-3) at "T = 298.2 K", respectively. The quantitative values of activity coefficients indicated higher interactions at molecular level in ECT and PEG-400 combination compared with ECT and water combination. "Apparent thermodynamic analysis" showed an "endothermic and entropy-driven dissolution" of ECT in all "PEG-400 + water" combinations studied. The solvation nature of ECT was found an "enthalpy-driven" in each "PEG-400 + water" mixture studied.

Green extraction of polyphenols from grapefruit peels using high voltage electrical discharges, deep eutectic solvents and aqueous glycerol.

Deep eutectic solvents (DES) and aqueous glycerol were proposed as green alternatives to conventional solvents for the extraction of polyphenols from grapefruit peels. In order to increase the extraction kinetics and yields of polyphenols, high voltage electrical discharges (HVED) were used as a pre-treatment technology (energy varied between 7.27 and 218 kJ/kg). Results showed that the HVED energy input can be reduced, when the subsequent solid-liquid extraction was performed in 20% (w/v) aqueous glycerol or in DES (lactic acid: glucose) instead of water. The addition of glycerol has reduced the energy of the pre-treatment by 6 times. The same diffusivity of polyphenols (4 × 10-11 m2/s) was obtained in water from HVED pre-treated peels at 218 kJ/kg and in aqueous glycerol from pre-treated peels at 36 kJ/kg. The solubility of naringin, the main flavonoid compound of grapefruit peels in the solvents, was investigated through a theoretical modelling of its Hansen solubility parameters.

Effect of Tetrabutylammonium Bromide-Based Deep Eutectic Solvents on the Aqueous Solubility of Indomethacin at Various Temperatures: Measurement, Modeling, and Prediction with Three-Dimensional Hansen Solubility Parameters.

Deep eutectic solvents (DESs) have recently been getting a great deal of attention in many fields of science and technology. The objective of this study was to peruse the solubility of indomethacin (IMC) as sparingly soluble drug in some tetrabutylammonium bromide (TBAB)-based DESs (TBAB/ethylene glycol and TBAB/glycerol). The shake flask method has been employed in this study at temperature ranges T = (298.15-313.15) K and atmospheric pressure (pP = 86.6 kPa). The results showed that the solubility of IMC in TBAB/ethylene glycol system was obtained approximately 17,000-fold more than its solubility in water. The solubility data were accurately correlated by the famous local composition activity coefficient models including e-NRTL and UNIQUAC. It was also our aim to evaluate Hansen solubility parameters in IMC solubility prediction. These parameters can help to predict the solvent performance during the manufacturing processes and will be useful in guessing solvent behavior in many other fields of effort. The experimental and the Hansen solubility parameters results are very well matched. In addition, the apparent thermodynamic properties of dissolution and mixing were studied in these solutions based on Van't Hoff and Gibbs equations.

Solubility measurement, Hansen solubility parameters and solution thermodynamics of gemfibrozil in different pharmaceutically used solvents.

Gemfibrozil (GEM) is cholesterol-lowering agent which is being proposed as poorly water soluble drug (PWSD). Temperature based solubility values of GEM are not yet available in literature or any pharmacopoeia/monograph. Hence, the present studies were carried out to determine the solubility of PWSD GEM (as mole fraction) in various pharmaceutically used solvents such as water (H2O), methanol (MeOH), ethanol (EtOH), isopropanol (IPA), 1-butanol (1-BuOH), 2-butanol (2-BuOH), ethylene glycol (EG), propylene glycol (PG), polyethylene glycol-400 (PEG-400), ethyl acetate (EA), dimethyl sulfoxide (DMSO) and Transcutol® (THP) at the temperatures ranging from T = 298.2 K-318.2 K under atmospheric pressure P = 0.1 MPa. Equilibrium/experimental solubilities of GEM were recorded by applying a saturation shake flask methodology and regressed using 'van't Hoff and Apelblat models'. Hansen solubility parameters for GEM and various pharmaceutically used solvents were estimated using HSPiP software. The solid states of GEM (both in pure and equilibrated states) were studied by 'Differential Scanning Calorimetry' which confirmed no transformation of GEM after equilibrium. Experimental solubilities of GEM in mole fraction were observed maximum in THP (1.81 × 10-1) followed by DMSO, PEG-400, EA, 1-BuOH, 2-BuOH, IPA, EtOH, PG, MeOH, EG and H2O (3.24 × 10-6) at T = 318.2 K and similar tendencies were also recorded at T = 298.2 K, T = 303.2 K, T = 308.2 K and T = 313.2 K. 'Apparent thermodynamic analysis' on experimental solubilities furnished 'endothermic and entropy-driven dissolution' of GEM in each pharmaceutically used solvent.

Synthesis and Gelling Abilities of Polyfunctional Cyclohexane-1,2-dicarboxylic Acid Bisamides: Influence of the Hydroxyl Groups.

New enantiomerically pure C16-alkyl diamides derived from trihydroxy cyclohexane-1,2-dicarboxylic acid have been synthesized from (-)-shikimic acid. The hydroxyl groups in these compounds are free or, alternatively, they present full or partial protection. Their gelling abilities towards several solvents have been tested and rationalized by means of the combined use of Hansen solubility parameters, scanning electron microscopy (SEM), and circular dichroism (CD), as well as computational calculations. All the results allowed us to account for the capability of each type of organogelator to interact with different solvents and for the main mode of aggregation. Thus, compounds with fully protected hydroxyl groups are good organogelators for methanol and ethanol. In contrast, a related compound bearing three free hydroxyl groups is insoluble in water and polar solvents including alcohols but it is able to gelate some low-polarity solvents. This last behavior can be justified by strong hydrogen bonding between molecules of organogelator, which competes advantageously with polar solvent interactions. As an intermediate case, an organogelator with two free hydroxyl groups presents an ambivalent ability to gelate both apolar and polar solvents by means of two aggregation patterns. These involve hydrogen bonding interactions of the unprotected hydroxyl groups in apolar solvents and intermolecular interactions between amide groups in polar ones.

Dietary live yeast and increased water temperature influence the gut microbiota of rainbow trout.

AIMS: The objective was to determine the effects of dietary substitution of fishmeal (FM) with live yeast and increasing water temperature on the diversity and composition of gut microbiota in rainbow trout. METHODS AND RESULTS: Fish were fed either FM or yeast (Saccharomyces cerevisiae) and reared in water temperatures of either 11°C (cold) or 18°C (warm) for 6 weeks. Luminal content and mucosa were collected from the distal gut and the load, diversity and species abundance of yeast and bacteria were analysed using agar plating, MALDI-TOF and rRNA gene amplicon sequencing. Yeast in the gut of fish fed FM were represented by S. cerevisiae, Rhodotorula spp. and Debaryomyces hansenii, while fish fed yeast contained 4-5 log higher CFU per g of yeast that were entirely represented by S. cerevisiae. For gut bacteria, sequencing of 16S rRNA gene amplicons using Illumina MiSeq showed lower bacterial diversity and abundance of lactic acid bacteria, especially Lactobacillus, in fish reared in warm rather than cold water. Fish fed yeast had similar bacterial diversity and lower abundance of Leuconostocaceae and Photobacterium compared with fish fed FM. CONCLUSIONS: Feeding live yeast mainly increased yeast load in the gut, while increased water temperature significantly altered the gut microbiota of rainbow trout in terms of bacterial diversity and abundance. SIGNIFICANCE AND IMPACT OF THE STUDY: Live yeast can replace 40% of FM without disrupting bacteria communities in the gut of rainbow trout, while increased water temperature due to seasonal fluctuations and/or climate change may result in a gut dysbiosis that may jeopardize the health of farmed fish.

Scanning electron microscopy study of hair shaft changes related to hardness of water.

INTRODUCTION AND AIMS: Brittleness and breakage of hair is a common complaint in the geographical area of Saudi Arabia where we work. This area has a high level of hardness in normal tap water. We aimed to study and compare structural differences and relative deposition of calcium and magnesium salts on the hair shaft surface using scanning electron microscopy (SEM) between hair shaft samples from normal, healthy volunteers treated with hard and soft water. METHODS: Hair samples obtained from 20 healthy volunteers were divided into two groups. One group was treated with hard water for 3 weeks and the second with soft water for the same duration. SEM was used to assess hair shaft surface damages and relative deposition of calcium and magnesium on the surface of the hair. RESULTS: There was no statistically significant difference between the study and control group as far as surface changes under SEM were concerned. As far as the relative deposition of calcium and magnesium was concerned, there was no statistically significant difference in calcium deposition between the control and study samples (P = 0.28). On the other hand, magnesium deposition showed a significant difference between both groups (P = 0.001), with a higher level in samples washed with hard water. CONCLUSIONS: Hard water may be associated with increased deposits on the hair shaft surface, however, this does not necessarily translate into evident structural surface changes, as evidenced by SEM.

Analysis of molecular mechanisms of ATP synthesis from the standpoint of the principle of electrical neutrality.

Theories of biological energy coupling in oxidative phosphorylation (OX PHOS) and photophosphorylation (PHOTO PHOS) are reviewed and applied to ATP synthesis by an experimental system containing purified ATP synthase reconstituted into liposomes. The theories are critically evaluated from the standpoint of the principle of electrical neutrality. It is shown that the obligatory requirement to maintain overall electroneutrality of bulk aqueous phases imposes strong constraints on possible theories of energy coupling and molecular mechanisms of ATP synthesis. Mitchell's chemiosmotic theory is found to violate the electroneutrality of bulk aqueous phases and is shown to be untenable on these grounds. Purely electroneutral mechanisms or mechanisms where the anion/countercation gradient is dissipated or simply flows through the lipid bilayer are also shown to be inadequate. A dynamically electrogenic but overall electroneutral mode of ion transport postulated by Nath's torsional mechanism of energy transduction and ATP synthesis is shown to be consistent both with the experimental findings and the principle of electrical neutrality. It is concluded that the ATP synthase functions as a proton-dicarboxylic acid anion cotransporter in OX PHOS or PHOTO PHOS. A logical chemical explanation for the selection of dicarboxylic acids as intermediates in OX PHOS and PHOTO PHOS is suggested based on the pioneering classical thermodynamic work of Christensen, Izatt, and Hansen. The nonequilibrium thermodynamic consequences for theories in which the protons originate from water vis-a-vis weak organic acids are compared and contrasted, and several new mechanistic and thermodynamic insights into biological energy transduction by ATP synthase are offered. These considerations make the new theory of energy coupling more complete, and lead to a deeper understanding of the molecular mechanism of ATP synthesis.

Polymer-water partition coefficients in polymeric passive samplers.

Passive samplers are of the most applied methods and tools for measuring concentration of hydrophobic organic compounds in water (c 1W ) in which the polymer-water partition coefficients (D) are of fundamental importance for reliability of measurements. Due to the cost and time associated with the experimental researches, development of a predictive method for estimation and evaluation of performance of polymeric passive samplers for various hydrophobic organic compounds is highly needed and valuable. For this purpose, in this work, following the fundamental chemical thermodynamic equations governing the concerned local equilibrium, successful attempts were made to establish a theoretical model of polymer-water partition coefficients. Flory-Huggins model based on the Hansen solubility parameters was used for calculation of activity coefficients. The method was examined for reliability of calculations using collected data of three polymeric passive samplers and ten compounds. A regression model of form ln(D) = 0.707ln(c 1p ) - 2.7391 with an R 2  = 0.9744 was obtained to relate the polymer-water partition coefficients (D) and concentration of hydrophobic organic compounds in passive sampler (c 1p ). It was also found that polymer-water partition coefficients are related to the concentration of hydrophobic organic compounds in water (c 1W ) as ln(D) = 2.412ln(c 1p ) - 9.348. Based on the results, the tie lines of concentration for hydrophobic organic compounds in passive sampler (c 1p ) and concentration of hydrophobic organic compounds in water (c 1W ) are in the form of ln(c 1W ) = 0.293ln(c 1p ) + 2.734. The composition of water sample and the interaction parameters of dissolved compound-water and dissolved compound-polymer, temperature, etc. actively influence the values of partition coefficient. The discrepancy observed over experimental data can be simply justified based on the local condition of sampling sites which alter these effective factors.